Replying to Thread:

Deutz F4M1011 timing belt tools and procedures

Created On Wednesday 6, October, 2004 4:07 PM by V8b2000

Please enter your login information to post.
Username:
Password:
I want to stay logged in.

Message Title:

Message Text:

http

https

ftp

mail

hr

highlight

LI Quote

[q]I have exactly same problem... Just made the tools.. but need to be shure on the rest of the procedure...Stoped in the rebuiding of the engine due not knowing how to obtain correct timing of CAM and CS...... any help?? my email is carl_8181@hotmail.com if any images are aviable from shop manual.... also valve clearances . please.. Thanks in advance from Venezuela[/q]

HTML code is not permitted. Special symbols permit some HTML functionality.

V8b2000

Posts: 1
Joined: Oct 2004

Wednesday October 06, 2004 16:07

I work on a fleet of Deutz F4M1011s and one of them just popped the timing belt the other day. Normally, I've been changing them every 5000 hours as a precautionary measure. When I'd change it, I would be very careful to not move the sprockets while the belt was off, set the tension to what I thought felt right, and I've been lucky so far--they've all run great afterwards. This situation is different since I don't have the special tools and procedure to reset both crank and cam to TDC. I know some of the pushrods will be trashed and I'm prepared to deal with that. Anyone out there know where to get the special tool (hopefully not from the Fatherland) and know how to do this???

I would greatly appreciate any help provided!

-------------------------
Plugs?!? We don't need no stinkin' plugs!!!

Quote

Top

Bottom

Deutzs

Posts: 2
Joined: Oct 2004

Wednesday October 27, 2004 08:02
Call me I either rent the tools or sell the toos. 203/265-7871

Quote

Top

Bottom

kiwi

Posts: 2
Joined: May 2006

Wednesday May 31, 2006 21:32
According to Deutz the belt should be replaced every 3000Hours ------------------------- Deutz Man New Zealand

Quote

Top

Bottom

deutzcanada

Posts: 7
Joined: Mar 2007

Saturday March 24, 2007 16:10
Were you able to obtain the tools and procedure you were looking for?

Quote

Top

Bottom

vampire13

Posts: 8
Joined: Jul 2013

Friday July 19, 2013 12:15

I have exactly same problem... Just made the tools.. but need to be shure on the rest of the procedure...Stoped in the rebuiding of the engine due not knowing how to obtain correct timing of CAM and CS...... any help?? my email is carl_8181@hotmail.com if any images are aviable from shop manual.... also valve clearances . please.. Thanks in advance from Venezuela

-------------------------
Mechanical Tecnician specialized in DETROIT DIESEL in all series.. owner of a Shop and Parts seller

Quote

Top

Bottom

[ CATEGORY LISTINGS : THREADS ]

Customer Testimonials

'Congratulations on your increasing traffic at web page. I keep several address slips I've made up for your web page and have had occasion to hand out 25-30 to persons needing an engine or having one to sell.'

Cal Harvey, Triangle Agriculture

'Had a Toyota motor for sale in our city paper for 2 years without success, but on DieselEngineTrader.com I got a quick response and it was sold.. Thanks for your help. I'll use it again.'

Glenn Poidinger, Merik Workshops, Canada

'Just for the record, I did get more traffic from your web site than any other way I tried to sell the motor and will certainly use your site again. Have also told others how many calls and e-mails I recieved - thanks again!'

Vince Tulio, Chalfont, Pennsylvania. USA

Deutz F4M1011 timing belt tools and procedures

Customer Testimonials

Newsletter