Replying to Thread:

Just installed 3116 out of 97 topkick with 113,000 miles runs exc but.....

Created On Wednesday 13, February, 2013 7:22 PM by Dickey

Please enter your login information to post.
Username:
Password:
I want to stay logged in.

Message Title:

Message Text:

http

https

ftp

mail

hr

highlight

LI Quote

[q]Is it a manual engine? If so, check the cable adjustment....it can easily slip and need to be reset.[/q]

HTML code is not permitted. Special symbols permit some HTML functionality.

Dickey

Posts: 8
Joined: Jan 2013

Wednesday February 13, 2013 19:22
Dickey Posts: 2 Joined: Jan 2013 Wednesday February 13, 2013 20:15 (NEW!) Hey I got a new 3116 installed its a 200 hp that runs exc but seems severely underpowered my old motor was 250 hp would the extra 50hp make such a huge difference ??? I mean with old engine with severe blowby and leaking antifreeze in engine still had more get up and go than perfect running 3116 no blowby low mile??

Quote

Top

Bottom

JoeZ

Posts: 938
Joined: Dec 2008

Wednesday February 13, 2013 20:25
Is it a manual engine? If so, check the cable adjustment....it can easily slip and need to be reset. ------------------------- One of the last 2 Stroke mechanics left. 44 years in the business and worked on everything from 53 series to 149 series. Winding it down now...time to move on.

Quote

Top

Bottom

Dickey

Posts: 8
Joined: Jan 2013

Wednesday February 13, 2013 20:31
It came from automatic but its in 9spd now , what do you mean throttle slip

Quote

Top

Bottom

JoeZ

Posts: 938
Joined: Dec 2008

Thursday February 14, 2013 05:10

Manual engine or electronic. The cable connects to the governor on the top left side of the engine from your foot pedal. There is an easy adjustment to insure you are getting a full fuel position on the governor.

-------------------------
One of the last 2 Stroke mechanics left.
44 years in the business and worked on everything from 53 series to 149 series. Winding it down now...time to move on.

Quote

Top

Bottom

Dickey

Posts: 8
Joined: Jan 2013

Thursday February 14, 2013 05:26
Ill try this and let you know thanks

Quote

Top

Bottom

Dickey

Posts: 8
Joined: Jan 2013

Thursday February 14, 2013 20:39

Took advice and checked to find out it was out of adjustment very little maybe lacking 1/4 inch if that ,I then reset cable now getting complete throtle ,seems odd but that little bit was making a good bit of difference ,running a lot better now but still seems a bit dead on old motor I remember the turbo coming in and out much quicker and louder thought maybe for some reason not getting right amount of boost for some reason????? I'm sure if its not just right(turbo/boost)it would make a world of difference seeing there isn't a lot of power anyway but I'm not sure where to start as to figuring/troubleshooting correct boost, I was gonna have it turned up a little just scarred to death of melting that expensive project I Just got finished !engine sounds very healthy no blowby,I'm kinda lost in which direction to go

Quote

Top

Bottom

JoeZ

Posts: 938
Joined: Dec 2008

Thursday February 14, 2013 22:19

You aren't going to get much out of a 200 HP engine without bringing up the HP and torque. That could override the cost of what it's worth. I can't remember if 200 HP or 215 HP is the cut-off for major changes to get to 250 HP...I believe it is 200. Maybe somebody else knows. Torque is important too.....
Horsepower is responsible for moving the truck along and gives it the ability to go down the road and accelerate on level ground. Torque is the force that helps the truck start moving from a stop and pulls it up hills. Bla-bla-bla.....
I had a few we put propane injection on and it did help, but that could get costly too. You might want to check your fuel pressure....and from my experience, most tune up's don't produce noticable results.
The other thing I have found is that a lot of bus engines were marked 200 HP but had been de-rated to 185 HP.

-------------------------
One of the last 2 Stroke mechanics left.
44 years in the business and worked on everything from 53 series to 149 series. Winding it down now...time to move on.

Edited: Thursday February 14, 2013 at 22:23 by JoeZ

Quote

Top

Bottom

[ CATEGORY LISTINGS : THREADS ]

Customer Testimonials

'We've sold a number of engines via DieselEngineTrader.com - even some that we've had lying around for a few years! It's very useful in getting our inventory seen by a much larger market.'

Jackie Read, A J Diesels Ltd, Southampton, UK

'We had a Mercedes engine in stock for over a year but were unable to sell it in Belgium - it was an unusual specification for generator use. Once we listed it on DieselEngineTrader.com, we sold it to a customer in England! We get regular inquiries from customers across the world.'

Rob Verhoeven, Hamofa Engines, Belgium

'Was looking for a Gardner 4LK to rebuild. None of my usual contacts could help me so I searched the Internet and found one on DieselEngineTrader. It was only 27 miles down the road!'

William Geldeard, North West Engine Services, Chester, UK

Just installed 3116 out of 97 topkick with 113,000 miles runs exc but.....

Customer Testimonials

Newsletter