crankshaft gear question

Message Title: Message Text:  http  https  ftp  mail    hr     highlight   LI   Quote  Select Emotion SmileWinkSadEmbarrasmentDisgustedBig GrinMadShockedTongueCoolFrownConfused [q]Rotate so that key way is up. You can see it from the front. Take a die grinder with a cut off wheel and start at the front making a slot or cut in between the teeth above the key way be careful not to go through completely of cut into the crank at the back of the gear. Get as much cut away as possible the drive a chisel into the cut and it will pop apart and slide off. Sometimes it will just pop apart with out driving a chisel into the cut. Clean crank nose and inspect. Heat gear and install.[/q]

HTML code is not permitted. Special symbols permit some HTML functionality.